Author Index

A

  • Abazari, Amir Musa Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
  • Abdollahi, Taleb Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
  • Ahmadi-Danesh-Ashtiani, Hossein Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
  • Ajori, Shahram A Molecular Dynamics Study on the Buckling Analysis of Functionalized Graphene with Nylon 6,6 in Aqueous Environment [Volume 19, Issue 4, 2023, Pages 1-10]
  • Akhbari, Sina Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]
  • Alikhani, Alireza Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]
  • Alimohammadian, Sina Numerical Analysis of Aerodynamic Interference of Two Passing Cylindrical Bodies at Supersonic Speeds [Volume 19, Issue 3, 2023, Pages 79-95]
  • Alirezapouri, Mohammadali Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
  • Alitavoli, Majid Experimental Study on the Effect of Adding Multi-walled Carbon Nanotubes on the Ballistic Limit of Fibers Metal Laminates [Volume 19, Issue 4, 2023, Pages 27-39]
  • Ameri, Mohammad Javad Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
  • Asgharzadeh- Bonab, Akbar Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
  • Avatefi Hemmat, Ali Diagnosis of Diesel Engine Based on Oil Analysis Using Convolutional Neural Network and Visualization [Volume 19, Issue 3, 2023, Pages 123-136]
  • Azimi, Milad Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]

B

  • Babaei, Alireza Control Allocation Based on Fuzzy Approach for Landing Phase of Specific Aircraft [Volume 19, Issue 2, 2023, Pages 1-10]
  • Babaei, Hashem Numerical Simulation of Triangular Plate Deformation Profile Under Gaseous Detonation Loading [Volume 19, Issue 1, 2023, Pages 1-15]
  • Bagherzadeh, Adel Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]
  • Bahmyari, Ehsan Experimental Study of the Impact of Interlayer Elastomeric Foam on Failure Pattern of Composite Laminated Panels with Various Layups [Volume 19, Issue 3, 2023, Pages 1-15]
  • Baradaran Razaz, Ahmad Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]
  • Barzegari, Mohammad Mahdi Optimization of Effective Parameters on the Bending Behavior of Honeycomb Sandwich Panels Using Response Surface Method [Volume 19, Issue 3, 2023, Pages 61-78]
  • Beiranvand, Hossein Preventing Unwanted Vibrations in the Environmental Test of Random Vibrations of a Spacecraft by Power Spectrum Density Notching [Volume 19, Issue 1, 2023, Pages 17-28]
  • Bigdeli, Hamid Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
  • Bozorgan, Navid Optimizing the Cooling System of an LH2/LOX Rocket Engine using the Bees Algorithm [Volume 19, Issue 3, 2023, Pages 109-121]

C

  • Chehardoli, Hossein Finite Time Adaptive Sliding Mode Control of Multi-agent Systems via Unknown External Disturbance and Undirected Network [Volume 19, Issue 3, 2023, Pages 137-148]
  • Chehardoli, Hossein Robust Adaptive Backstepping Control of Automated Vehicle Convoys in the Presence of Combined Actuator Fault, Parameter Uncertainties, and External Disturbance by Considering Speed Constraints [Volume 19, Issue 4, 2023, Pages 119-133]

D

  • Darabi, Hadi Stable Inversion for Feedforward Control of Flexible Cooperative Manipulators [Volume 19, Issue 1, 2023, Pages 123-135]
  • Darvizeh, Abolfazl Experimental Study on the Effect of Adding Multi-walled Carbon Nanotubes on the Ballistic Limit of Fibers Metal Laminates [Volume 19, Issue 4, 2023, Pages 27-39]
  • Dehghan, Mohammad Mahdi Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
  • Dehnad, Masoud Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]

E

  • Ebrahimi, Ali Flocking of Quadcopter Robots Observing Safety Distance [Volume 19, Issue 3, 2023, Pages 17-32]
  • Ebrahimi, Mahmoud Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
  • Ebrahimi, Mahmoud Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
  • Eghlimi Dezh, Marzieh Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]
  • Elhami, Mohammad Reza Stable Inversion for Feedforward Control of Flexible Cooperative Manipulators [Volume 19, Issue 1, 2023, Pages 123-135]
  • Es'haghi Oskui, Abuzar Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
  • Eskandarijam, Jafar Optimization of Effective Parameters on the Bending Behavior of Honeycomb Sandwich Panels Using Response Surface Method [Volume 19, Issue 3, 2023, Pages 61-78]
  • Esmaeili, Arezoo Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]

F

  • Farhid, Morteza Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]
  • Farrokhi, Mohammad Flocking of Quadcopter Robots Observing Safety Distance [Volume 19, Issue 3, 2023, Pages 17-32]

G

  • Ghahreman, Hadi Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
  • Ghashochi-Bargh, Hadi Investigation of Lamb Waves Propagation in Variable Stiffness Fiber Metal Laminated Plates Using Finite Element Method [Volume 19, Issue 1, 2023, Pages 81-92]

H

  • Haghgoo, Mojtaba Numerical Simulation of Triangular Plate Deformation Profile Under Gaseous Detonation Loading [Volume 19, Issue 1, 2023, Pages 1-15]
  • Hajipour, Mohammad Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
  • Hasani, Melina Investigation of Lamb Waves Propagation in Variable Stiffness Fiber Metal Laminated Plates Using Finite Element Method [Volume 19, Issue 1, 2023, Pages 81-92]
  • Hosseini, Rouhollah Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
  • Hosseini, Rouhollah Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]

K

  • Karami, Ramin Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
  • Kazemi, Hamid Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]

M

  • Madani Esfahani, Mahyar Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
  • Mahdavi Golmisheh, Fatemeh Optimal Formation Control for Unmanned Aerial Vehicle Teams with Collision Avoidance Constraint and Unknown Dynamics [Volume 19, Issue 1, 2023, Pages 61-79]
  • Mirjalily, Seyed Ali Agha Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]
  • Mirshekari, Erfan Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
  • Mirzababaie Mostofi, Tohid Numerical Simulation of Triangular Plate Deformation Profile Under Gaseous Detonation Loading [Volume 19, Issue 1, 2023, Pages 1-15]
  • Mirzababaie Mostofi, Tohid Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
  • Mirzaei, Mehdi Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
  • Moayedi Manizani, Siavash Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
  • Mohammadi Hooyeh, Hadi Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
  • Mollazadeh, Zahra Optimization of Effective Parameters on the Bending Behavior of Honeycomb Sandwich Panels Using Response Surface Method [Volume 19, Issue 3, 2023, Pages 61-78]
  • Montazeri, Morteza Thermodynamic Simulation of Fouling and Erosion in an Industrial Gas Turbine for Power Generation Applications [Volume 19, Issue 4, 2023, Pages 53-69]
  • Moradi, Mortaza Applying Robust Quasi-Sliding Mode Approach for Attitude Control of a Flexible Spacecraft [Volume 19, Issue 3, 2023, Pages 97-108]

N

  • Naddaf Oskouei, Alireza Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
  • Naddaf Oskouei, Alireza Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]
  • Najafi, Amin Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
  • Namvar, Ali Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
  • Naseh, Hassan Preventing Unwanted Vibrations in the Environmental Test of Random Vibrations of a Spacecraft by Power Spectrum Density Notching [Volume 19, Issue 1, 2023, Pages 17-28]
  • Nateghi, Alireza Active Control of Suspension Oscillations in Aircraft by using NARMA-L2 Neural Controller [Volume 19, Issue 2, 2023, Pages 41-55]
  • Nazari, Ali Reza Experimental Study of the Impact of Interlayer Elastomeric Foam on Failure Pattern of Composite Laminated Panels with Various Layups [Volume 19, Issue 3, 2023, Pages 1-15]
  • Nekoonam, Ali Thermodynamic Simulation of Fouling and Erosion in an Industrial Gas Turbine for Power Generation Applications [Volume 19, Issue 4, 2023, Pages 53-69]
  • Nemati, Mohammad Numerical Evaluation via Lattice Boltzmann Method to Analyze of Entropy Generation due to Conjugate Mixed Convection Heat Transfer of Non-Newtonian Nanofluid under the Influence of Magnetic Field [Volume 19, Issue 2, 2023, Pages 113-129]
  • Nikseresht, Saba Control Allocation Based on Fuzzy Approach for Landing Phase of Specific Aircraft [Volume 19, Issue 2, 2023, Pages 1-10]
  • Nikusokhan Lame, Mahdi Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control [Volume 19, Issue 4, 2023, Pages 41-52]
  • Nourmohammadi, Hossein Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]

O

  • Oloomi, Seyed Amir Abbas Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]

P

  • Pourmoayed, Alireza Numerical Analysis of Aerodynamic Interference of Two Passing Cylindrical Bodies at Supersonic Speeds [Volume 19, Issue 3, 2023, Pages 79-95]

R

  • Rafatnia, Sadra Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
  • Rahmani, Kamran Experimental Study on the Effect of Adding Multi-walled Carbon Nanotubes on the Ballistic Limit of Fibers Metal Laminates [Volume 19, Issue 4, 2023, Pages 27-39]
  • Ramezani, Saeed Diagnosis of Diesel Engine Based on Oil Analysis Using Convolutional Neural Network and Visualization [Volume 19, Issue 3, 2023, Pages 123-136]
  • Ranjbar, Mohammad Ali Numerical Analysis of Aerodynamic Interference of Two Passing Cylindrical Bodies at Supersonic Speeds [Volume 19, Issue 3, 2023, Pages 79-95]

S

  • Saberi Moghaddam, Mohammad Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
  • Sadati, Seyed Hossein Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control [Volume 19, Issue 4, 2023, Pages 11-26]
  • Sadeghi, Fatemeh A Molecular Dynamics Study on the Buckling Analysis of Functionalized Graphene with Nylon 6,6 in Aqueous Environment [Volume 19, Issue 4, 2023, Pages 1-10]
  • Sadeghi, Fatemeh Modeling the Oscillatory Behavior of Carbon Nano-onions Inside Single-walled Carbon Nanotubes Based on the Continuum Approximation Method [Volume 19, Issue 4, 2023, Pages 135-148]
  • Salehi, Mohammad Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
  • Salimpour, Mohammad Reza Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]
  • Samiei, Seyed Kianoosh Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
  • Sefid, Mohammad Numerical Evaluation via Lattice Boltzmann Method to Analyze of Entropy Generation due to Conjugate Mixed Convection Heat Transfer of Non-Newtonian Nanofluid under the Influence of Magnetic Field [Volume 19, Issue 2, 2023, Pages 113-129]
  • Shahrooi, Shahram Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
  • Shamaghdari, Saeed Optimal Formation Control for Unmanned Aerial Vehicle Teams with Collision Avoidance Constraint and Unknown Dynamics [Volume 19, Issue 1, 2023, Pages 61-79]
  • Shamaghdari, Saeed Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
  • Shateri, Majid Experimental Investigation of the Effect of Cathode Side Liquid Water Accumulation on the Impedance of a Dead Ended Polymer Electrolyte Membrane Fuel Cell by Electrochemical Impedance Spectroscopy Method [Volume 19, Issue 2, 2023, Pages 95-111]
  • Shaterzadeh, Alireza Thermal Buckling and Postbuckling Analysis of Plates Reinforced with Graphene Platelets Using Differential Quadrature Method [Volume 19, Issue 4, 2023, Pages 103-117]
  • Soori, Mohammad Mahdi Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control [Volume 19, Issue 4, 2023, Pages 11-26]

T

  • Taei, Hojat Control Allocation Based on Fuzzy Approach for Landing Phase of Specific Aircraft [Volume 19, Issue 2, 2023, Pages 1-10]
  • Taei, Hojat Applying Robust Quasi-Sliding Mode Approach for Attitude Control of a Flexible Spacecraft [Volume 19, Issue 3, 2023, Pages 97-108]
  • Torabi, Farschad Experimental Investigation of the Effect of Cathode Side Liquid Water Accumulation on the Impedance of a Dead Ended Polymer Electrolyte Membrane Fuel Cell by Electrochemical Impedance Spectroscopy Method [Volume 19, Issue 2, 2023, Pages 95-111]

V

  • Vahedi, Khodadad Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]

Y

  • Yakhchian, Bahareh Thermal Buckling and Postbuckling Analysis of Plates Reinforced with Graphene Platelets Using Differential Quadrature Method [Volume 19, Issue 4, 2023, Pages 103-117]
  • Yazdanpanah, Milad Active Control of Suspension Oscillations in Aircraft by using NARMA-L2 Neural Controller [Volume 19, Issue 2, 2023, Pages 41-55]
  • Yeganeh Sarcheshmeh, Masoud Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
  • Yousefi Lademakhi, Naeim Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
  • Yousefi Tireh Shabankare, Ali Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]
  • Yousofi Tezerjan, Mostafa Diagnosis of Diesel Engine Based on Oil Analysis Using Convolutional Neural Network and Visualization [Volume 19, Issue 3, 2023, Pages 123-136]

Z

  • Zadshakoyan, Mohammad Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
  • Zamani, Mohammad Reza Optimization of Effective Parameters on the Bending Behavior of Honeycomb Sandwich Panels Using Response Surface Method [Volume 19, Issue 3, 2023, Pages 61-78]
  • Zamani Ashani, Jamal Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
  • Zeynalbeyk, Mohammad Javad Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]